Filter
Top Products
2635A
Users Manual
2-22
Typical
Required
LIMIT
ENTER
Selecting Alarm 1 or Alarm 2. Press the ALRM
(Alarm) key to access the alarm selection menu.
Use the up/down arrow keys to select alarm 1 or
2, then press the ENTER key.
ALRM
1
2
LIMIT
ENTER
LIMIT
OFF
HI
LO
ENTER
LIMIT
X
.
X X X X
X X
.
X X X
X X X
.
X X
X X X X
.
X
ENTER
LIMIT
ENTER
x1
m
M
k
Selecting the Alarm Numerical Value. Press
the up/down and left/right arrow keys to enter a
five digit number that defines the numerical value
for the alarm, ignoring the decimal point or scale
multiplier. The column being configured will have
a bright display. For example, for an alarm of
132.75V ac, enter +13275. When the entry is
correct, press the ENTER key.
Selecting the Alarm Decimal Value. Press the
left/right arrow keys to position the decimal point
in the number selected in the previous step. For
the example above, the settings would be 132.75.
When the decimal point is correct, press the
ENTER key.
Selecting the Alarm Mode. Press the up/down
arrow keys to select an alarm mode, OFF (Off), HI
(High), or LO (Low), then press the ENTER key.
Selecting the Alarm Scale Multiplier. Press the
up/down arrow keys to select the desired
multiplier: x1 (x1), m (x .001), M (x1,000,000), or
k (x1,000). For the example above, the 132.75
multiplier would be x1. When the multiplier is
correct, press the ENTER key. If alarm 1 is
configured, the procedure continues for alarm 2.
If alarm 2 is configured, the procedure terminates.
± 0 0 0 0 0
- to -
± 9 9 9 9 9
op25f.eps
Figure 2-13. Setting the Alarms