Filter
Top Products
Ten Minute Tour
(continued)
xv
POWER
CH
20
...
10
...
0
Applying power. Press the power switch to
apply power. Other power-on options include
Configuration-Reset, Display-Hold, and
Temperature-Toggle. [Figure 2-2]
Selecting a Channel. Up/down arrow keys
select a channel from 0 to 20. Channel 0
connections are on the front panel; Channels 1
through 20 connections are via the rear-panel
Universal Input Module. Select Channel 10.
[Figure 2-3]
A
FUNC
ENTER
ENTER
OFF
°F [°C]
Hz
Ω
VAC
V DC
SET FUNC
SET FUNC
Auto
150.00 V
30.000 V
3.0000 V
300.00 mV
Selecting a Function. Press the FUNC key to
open the function menu. Up/down arrow keys
select a function. Temperature unit °F/°C is set
with the Temperature-Toggle Power-On
procedure. Select VAC, then press ENTER.
[Figure 2-5]
Selecting a Measurement Scale. Up/down
arrow keys select a measurement scale. AUTO
indicates autoranging, where the instrument
automatically selects the scale that provides the
best measurement resolution. Scale values are
maximum expected readings, e.g., the 30.000
VAC scale is for measurements of 30 VAC or
less. Select 150.00 V scale, then press ENTER.
Channel 10 is now configured. [Figure 2-5]
op79_1f.eps
Ten Minute Tour