Filter
Top Products
4-50 5708009-C
Advanced Energy
®
130
read
mainframe
software
version
number
Requests the version number of the
mainframe software. The returning packet
contains 7 ASCII characters—a 7-digit
number. This command is used in
conjunction with CMD 198 to obtain the
version/revision number of the mainframe
software.
07 data bytes
7 ASCII
characters
140
report host
time-out
value
Requests the serial Host port time-out value
(002 to 500 representing 0.02 to 5.00 s).
02 data bytes
16-bit value
154
report
regulation
mode
Requests regulation mode (set with CMD 3).
Returning values:
• 6 = Forward
• 7 = Delivered or Load
• 8 = External (DC Bias)
1 data byte
8-bit value
155
read control
method
Requests control mode (set by CMD 14).
Returning values: 2 = host, 4 = analog
01 data byte
8-bit value
156
read active
target
Requests the number of the active target (set
by CMD 11)
01 data byte
8-bit value
157
read target
life
Requests the amount of life remaining in the
target you specify (set by CMD 12). This
command requires 1 data byte to specify the
number of the target you request (1 to 4).
Note: A decimal is implied—100 = 1 kWh,
1 data byte
8-bit value
4 data bytes
32-bit value
Table 4-6. Host Port Commands for RS-232 with AE Bus (Continued)
Command
Description
Number of
Host Data
Bytes
Number of
Response
Data Bytes