Filter
Top Products
4-32 5708009-C
Advanced Energy
®
WIRING DIAGRAMS FOR OPTION E USER PORT
The diagrams in this section provide wiring information to properly connect to the
Apex 15-pin User port configuration E.
14 MODULE STATUS
LED OUTPUT
(AMBER)
Digital
output
This pin provides the
output for remote
DeviceNet LED and is
connected to the emitter of
an opto-coupler. The User
must limit the current
draw through this pin to
45mA or less.
Note: Defined by
DeviceNet
Specification,
Release 2.0
See Wiring Diagram 4-24.
15 NETWORK STATUS
LED OUTPUT
(AMBER)
Digital
output
This pin provides the
output for remote
DeviceNet LED and is
connected to the emitter of
an opto-coupler. The User
must limit the current
draw through this pin to
45mA or less.
Note: Defined by
DeviceNet
Specification,
Release 2.0
See Wiring Diagram 4-24.
Table 4-3. User Port (15-pin) Connector Pins Exclusive for Configuration E (Continued)
Signal
Pin
Return
Pin
Name Signal
Type
Description