Filter
Top Products
5708009-C 3-3
Apex 1 to 5.5 kW Generator
AC power input connector
Note: Varies according to the
option defined by PIN
position 13.
A—ODU connector (see “ODU Connector” on
page 5-7)
B—Non-terminated 3 m, 4-conductor, shielded pigtail
(see “NonTerminated, four-Conductor Pigtail” on
page 5-8)
C—Non-terminated 12¢, 4-conductor, pigtail (see
“NonTerminated, four-Conductor Pigtail” on page 5-8)
D—Harting Type Han-Q (see “Harting Type Han-Q
Connector” on page 5-9)
E—4-terminal, stud mount
F—15´ 4-conductor, with a Hubbell CS8365C plug
G—5´ Harting
H—Term 3m, 4 cond, shielded pigtail Marinco 3015P
J—5’ terminated, 4 conductor, SH with contact LS1
BF.F6 5+PE (30A)
K—ODU connector with 20 degree rotation
L—Harting Type Han-Q (16A) rotated 180 degrees
M—6’,4 conductor with #10 ring lugs on each wire
RF output connector
Note: Varies according to the
option defined by PIN
position 11.
0—exclusive option #1
1—7/16 connector (see “Connecting Output Power” on
page 5-5)
2—SQS‘connector (see “Connecting Output Power” on
page 5-5)
3—LC connector (see “Connecting Output Power” on
page 5-5)
4—HN (see “Connecting Output Power” on page 5-5)
5—N (see “Connecting Output Power” on page 5-5)
6—exclusive option #2
RF Connector location
Note: Varies according to the
option defined by PIN
position 10.
0—opposite end from water connections
1—utilities end (near water connections)
Table 3-1. Physical Specifications (Continued)
Description PIN Option—Specification