Filter
Top Products
4-2 5708009-C
Advanced Energy
®
APEX USER PORT OPTIONS
The following sections provide information for each of the User port options available
with the 1 to 5.5 kW Apex generator. These options are:
•“25-Pin Apex Standard User Port” on page 4-2
•“15-Pin User Port (Exclusive—Option D)” on page 4-16
•“15-Pin User Port (Exclusive—Option E)” on page 4-26
Not all of these sections apply to any one Apex unit. To identify the section that
applies to your unit, see “Using this Manual to Find Information for Your Generator”
on page 1-1. Each of these sections also contains a PIN configuration note, which will
help you confirm whether or not a particular section applies to your unit.
25-Pin Apex Standard User Port
The following section describes the Apex standard 25-pin User port. To determine if
your Apex unit has this interface, use the configuration PIN from your Apex unit and
the following Configuration Note.
This User port is the standard option.
The User port uses a 25-pin, shielded, female, subminiature-D connector.
Figure 4-1. User Port connector 25 Pin APEX Standard
This section of the manual provides information for the:
Apex standard 25-pin User port option
PIN position 8, (A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17) option B.
(When identifying the PIN position, remember that the A at the beginning of
the PIN is not counted as a position. The PIN option is the number or letter
you should look for in the specified position.)
For more information about the PIN and for a complete list of how PIN
positions correspond to Apex product options, see Table 1-1. on page 1-4.