Filter
Top Products
5708009-C 5-1
Chapter
Apex 1 to 5.5 kW Generator
Chapter
5
5Installation, Setup, and
Operation
This chapter guides you through the process of installing, setting up, and operating an
Apex generator. It includes the following sections:
•“Installing the Generator” on page 5-1
•“First Time Operation” on page 5-12
•“Normal Operation” on page 5-13
•“Understanding and Setting Up Pulsing Output” on page 5-13
Because Apex generators are equipped with varying options, not all of the information
in this chapter applies to every Apex generator. In places where the information is
option-specific, configuration notes are used to identify the PIN position and option
associated with the information. For information on using the Apex PIN to locate the
information in this manual that is applicable to your unit, see “Using this Manual to
Find Information for Your Generator” on page 1-1.
INSTALLING THE GENERATOR
The following sections provide information to help you install the Apex generator.
Unpacking
Unpack and inspect the generator carefully. Check for obvious physical damage. If no
damage is apparent, proceed with the unit connections. If you do see signs of shipping
damage, contact Advanced Energy Industries, Inc., and the carrier immediately. Save
the shipping container for submitting necessary claims to the carrier.
Grounding
The unit provides two threaded grounding holes (one is a metric A-6, the other is a
5/16
″ x 18 US). A suitable chassis ground connection made to either of these holes
prevents or minimizes radio frequency interference.
Note: For more information about grounding, refer to AE Application Notes titled
Grounding p/n 5600031A.