Filter
Top Products
Programming Site Data 4-33
April 2004
Entering Skan/Correlation Parameters (cont.)
2. Repeat step 1 to enter the maximum percentage of peak.
3. The next prompt asks for the Percent of Peak, which is used to
calculate the transit times and Delta-T.
a. Press
[ENTER] to enter the text box.
b. Use the numeric keys to enter the desired value.
c. Press
[ENTER] to confirm the entry.
4. To select (or deselect) Measure Times only (instead of both
Skan and Measure times), press
[ENTER] at the Measure Only
prompt.
Pressing the [T] key returns the meter to the Min Threshold
entry, and pressing the [
S] key returns the meter to the Correlate
tab.
• To confirm the entries and return to Operate mode, press [F3]
(OK).
• To leave the window without confirming the entries and return
to Operate mode, press
[F2] (Cancel) or the [ESC] key.