Filter
Top Products
Programming Meter Settings 7-17
April 2004
Changing Communications Settings (cont.)
6. The next prompt asks you to select either one or two stop
bits.The default number is one. Use the [
W ] and [X] keys to
scroll to the desired number, and press
[ENTER].
7. The final prompt asks you to select either seven or eight data
bits. The default number is 8. Use the [
W ] and [X] keys to
scroll to the desired number, and press
[ENTER].
• To confirm the entries and return to Operate mode, press [F3]
(OK).
• To leave the window without confirming the entries and return
to Operate mode, press
[F2] (Cancel) or the [ESC] key.