Filter
Top Products
Programming Site Data 4-23
April 2004
Entering Mass Flow Parameters (cont.)
2. If you have enabled Mass Flow, the next prompt asks for the
calculation method. Three options are available: static density,
saturated steam, and steam.
a. Press
[ENTER] to open the drop-down menu.
b. Scroll to the appropriate method for your application.
c. Press
[ENTER] to confirm the entry.
• If you select Saturated Steam:
The prompt asks for the Saturated Steam input. Press
[ENTER], scroll to either Temperature or Pressure, and
press
[ENTER].
• If you select StaticDensity:
The prompt asks for the Static Density value. Press
[ENTER] to open the text box, enter the appropriate value,
and press
[ENTER] to confirm the entry.
Pressing the [
S] key returns the meter to the Mass Flow prompt,
and then to the Mass Flow tab.
• To confirm the entries and return to Operate mode, press [F3]
(OK).
• To leave the window without confirming the entries and return
to Operate mode, press
[F2] (Cancel) or the [ESC] key.