Servicing the PT878GC 9-25
April 2004
Setting up Signal Parameters
The Signal Setup option enables you to set parameters that affect
the transducer signal:
• Delta-T Offset
• Transmit Sample Size
• Zero Cutoff
• Velocity Averaging
• Errors Allowed
• Peak Detection Method
• Peak Thresholds
• Pulse and Code
To enter the option, scroll to the Signal Setup entry on the Service
Menu and press
[ENTER]. The screen appears similar to Figure
9-16 below.
Figure 9-16: The Signal Parameter Window
Meas Mode
Signal Param
Signal Setup
Cancell
OK
Delta-T Offset
Errors Allowed
Velocity Averaging
Transmit Sample Size
Zero Cutoff
0
m/s
10
8
5ns
8
Pulse/Code