Filter
Top Products
April 2004
4-8 Programming Site Data
Entering Pipe Parameters (cont.)
1. The first prompt asks you to select the pipe material.
a. Press
[ENTER] to enter the material prompt.
b. A drop-down list of materials opens. Table 4-1 below lists
the available preprogrammed materials on the list. Press
the [
T] or [S] keys to scroll to the appropriate material,
or scroll to “Other” for a material not on the list. You can
press the [
X] key to scroll down by a page, or the [W] key
to scroll up by a page.
c. Press
[ENTER] to confirm the choice.
Table 4-1: Preprogrammed Pipe Materials
Pipe Material
Category Specific Material
Al - Aluminum Rolled
Brass None
Cu - Copper Annealed or Rolled
CuNi - Copper/Nickel 70% Cu 30% Ni or
90% Cu 10% Ni
Glass Pyrex, Flint, or Crown
Gold Hard-drawn
Inconel None
Iron Armco, Ductile, Cast, Electrolytic
Monel None
Nickel None
Plastic Nylon, Polyethylene, Polypropy-
lene, PVC (CPVC), or Acrylic
Steel Carbon Steel or Stainless Steel
Tin Rolled
Titanium None
Tungsten Annealed, Carbide, Drawn
Zinc Rolled
Other Any material