Filter
Top Products
Programming Site Data 4-21
April 2004
Entering Inputs in the Standard Volume Option (cont.)
Note: If you have switched both active inputs to #A (or to #B),
the PT878GC automatically switches one input to the
other letter. This change ensures that only one analog
input is assigned to one measurement type.
Pressing the [T] key returns the meter to the Inputs tab.
• To confirm the entries and return to Operate Mode, press [F3]
(OK).
• To leave the window without confirming the entries and return
to Operate mode, press
[F2] (Cancel) or the [ESC] key.