Filter
Top Products
Displaying and Configuring Data 6-9
April 2004
Customizing the Display Screen
You might wish to display one or two parameters, or customize
the soft keys to quickly access particular menus. The Site Menu
enables you to make more comprehensive changes in your
display screen.
To enter the Site Menu, press the
[MENU] key at the lower right
of the PT878GC keypad. The Menu Bar replaces the Status Bar at
the top of the screen. The Site Menu will be highlighted in the
upper left corner. Press
[ENTER] or the [T] arrow key. The
screen now appears similar to Figure 6-6 below. While following
the programming instructions, refer to Figure A-2 on page A-2 of
Appendix A, Menu Maps.
Figure 6-6: The Site Menu
• To specify the number of parameters displayed, go to page
6-10.
• To customize or clear softkeys (FKeys), go to page 6-11.
Meter Logging Service
Velocity, ft/s
0.00
32
Delta-T, ns
0.10
0.0
Volume, l/s
E0: No Errors
Signal, dB
Save Now
1 View
2 Views
3 Views
4 Views
Drive Manager
FKeys
4
Manager
Site Program
About