Filter
Top Products
April 2004
4-50 Programming Site Data
Entering Correction Factors
The final option in the Program Menu, Correction Factors, allows
you to enter and modify three correction factors: Reynolds
Correction, Kinematic Viscosity and Calibration Factor. To enter
the Correction Factors option, scroll to the Correction Factors
entry on the Program Menu and press
[ENTER]. The screen
appears similar to Figure 4-24 below. To step through each
parameter, press the [T] key. Refer to Figure A-7 on page A-7 of
Appendix A, Menu Maps.
Figure 4-24: Reynolds Correction Window
Entering Reynolds Correction
1. The first prompt asks if you want to enable the Reynolds
Correction factor, a number based on the Kinematic Viscosity
and flow rate of the gas.
a. Use the [
W ] and [X] keys to scroll to the appropriate
radio button.
Reynolds Correction
Inputs
Correction Factors
Cancell
OK
Calibration Factor
Re Correction
On
Off
K/V x 10
-6
m
2
/s
Data Source
K/V Factors
Single
Table
Edit Table
10