Filter
Top Products
April 2004
7-2 Programming Meter Settings
Entering the Meter Menu
To enter the Meter Menu, press the [MENU] key at the lower right
of the PT878GC keypad. The Main Menu replaces the Status Bar
at the top of the screen. Press the [
X] arrow key twice to scroll
from the Site Menu to the Meter Menu. At the Meter Menu, press
[ENTER]. The screen appears similar to Figure 7-1 below. While
programming, refer to Figure A-8 on page A-8 of Appendix A,
Menu Maps.
Figure 7-1: The Meter Menu
To scroll to a particular option, press the [
T] or [S] arrow keys
until you reach the option. Then press
[ENTER] to open the option
window.
When entering parameters in an option, press:
• The [T ] key to step through the available parameters
• The [S] key to scroll back to a previously entered parameter
• The [F2] key (Cancel) or the [ESC] key to exit an option at any
time and return to Operate Mode without changing the
parameters.
Velocity, ft/s
Signal, dB
0.00
32
Delta-T, ns
0.10
0.0
E0: No Errors
Site Program Meter Logging Service
Units
Date/Time
Locale
Contrast
Backlight
Units
Language
Communication
Totals X
Battery
User Tables
Snapshot
Volume, ft
3
/s