Filter
Top Products
Programming Site Data 4-7
April 2004
Entering Pipe Parameters
To enter the Pipe option, scroll to the Pipe entry on the Program
Menu and press
[ENTER]. (From the Transducer window, you can
scroll back up to the Transducer tab and press the [
X] arrow key
to reach the Pipe window and press
[ENTER].) The screen
appears similar to Figure 4-3 below. To step through each
parameter, press the [
T] key. Refer to Figure A-4 on page A-4 of
Appendix A, Menu Maps.
Note: Refer to the brochure Sound Speeds and Pipe Size Data
(914-004) for additional information about pipe sizes and
sound speeds.
Figure 4-3: The Pipe Option Window
Transducer
Lining
Path
Transducer/Pipe
5
Schedule
Cancell
OK
Pipe
Material
Other
SndSpeed
600.3
m/s
OD, mm
Wall, mm
2
Nominal
Schedule
Fluid
5
OD x PI, mm
15.708
ANSI