Filter
Top Products
April 2004
8-2 Logging Data
Entering the Logging Menu
To enter the Logging Menu, press the [MENU] key at the lower
right of the PT878GC keypad. The Main Menu replaces the
Status Bar at the top of the screen. Press the [
X] arrow key three
times to scroll from the Site Menu to the Logging Menu. At the
Logging Menu, press
[ENTER]. The screen appears similar to
Figure 8-1 below. Refer to Figure A-9 on page A-9 of Appendix
A, Menu Maps.
Figure 8-1: The Logging Menu
To scroll to a particular option, press the [
T] or [S] arrow keys
until you reach the option. Then press
[ENTER] to open the option
window.
When entering parameters in an option, press:
• The [T ] key to step through the available parameters
• The [S] key to scroll back to a previously entered parameter
• The [F2] key (Cancel) or the [ESC] key to exit an option at any
time and return to Operate Mode without changing the
parameters.
Velocity, ft/s
Signal, dB
0.00
32
Delta-T, ns
0.10
0.0
Volume, l/s
E0: No Errors
Site Program Meter Logging Service
Units
Manager
New Log
Test