Filter
Top Products
April 2004
4-2 Programming Site Data
Entering the Program Menu
To enter the Program Menu, press the [MENU] key at the lower
right of the PT878GC keypad. The Menu Bar replaces the Status
Bar at the top of the screen. Press the [
X] arrow key once to
scroll from the Site Menu to the Program Menu. At the Program
Menu, press
[ENTER]. The screen appears similar to Figure 4-1
below. While following the programming instructions, refer to
Figure A-2 on page A-2 of Appendix A, Menu Maps
Figure 4-1: The Program Menu
To scroll to a particular option, press the [
T]or [S] arrow keys
until you reach the option. Then press
[ENTER] to open the option
window.
When entering parameters in an option, press:
• The [T] key to step through the available parameters
• The [S] key to scroll back to a previously entered parameter
• The [F2] key (Cancel) or the [ESC] key to exit an option at any
time and return to Operate Mode without changing the
parameters.
Note: On certain text box parameters, you can use the numeric
keys to enter a desired value. You can then use the [
S
] or
[
T
] keys to change the value, if necessary.
Vel
ocity, ft/s
Signal, dB
0.00
32
Delta
-T, ns
0.10
0.0
Volume, l/s
E0: No Errors
Pipe
Path
Fluid
Std Vol/Mass Flow
Analog Input
Analog Output
Digital Output
User Functions
Site Program Meter Logging Service
Transducer
Correction Factors
Skan/Measure
Lining