Filter
Top Products
18
2.3.10 Power supply filters
To comply with EEC directive 89/336/EEC, a mains filter of the appropriate type must be connected.
This will ensure that the unit complies with the CE specifications for which it has been tested. If the
MintDrive has the 24VDC input power supply option then a further filter will be necessary to comply with
CE specifications. Schaffner filters are recommended, with part numbers shown below:
Voltage
230VAC, 1φ 115VAC, 1φ
MintDrive current rating 2.5A FN2070 -10-06 FN9675-3-06
5A FN2070-6-06 FN2070-10-06
7.5A FN2070-10-06
(Use FN2070-12-06 if 24V
option is fitted)
FN2070-12-06
230VAC, 3φ -
10A FN351-36-33 -
15A FN351-50-33 -
24VDC
All models FN9675 -3-06
Table 1 - Schaffner filter part numbers
See Appendix D, section D.1.3 for details of filter dimensions and Baldor catalog numbers.