Installed Software 77
E-EQ-VX6RG-J VX6 Reference Guide
• Image Viewer
• Scanner Wedge (LXE developed)
• ActiveSync
• Transcriber
• Media Player
• Internet Explorer
Note that the viewer applications allow viewing documents, but not editing them.
Java (Optional)
Installed by LXE. Files can be accessed by tapping Start | Programs | JEM-CE. Doubletap the
EVM icon to open the EVM Console. A folder of Java examples and Plug-ins is also installed
with the Java option. LXE does not support Java applications running on the mobile device.
LXE RFTerm (Optional)
Installed by LXE. The application can be accessed by tapping Start | Programs | RFTerm.
Please refer to “Setup Terminal Emulation Parameters” earlier in this guide for RFTerm quick
start instruction. Refer to the “RFTerm Reference Guide” on the LXE Manuals CD for complete
information and instruction.
AppLock
Installed by LXE. Application is setup by the Administrator by tapping Start | Settings | Control
Panel | Administration. Configuration parameters are specified by the AppLock Administrator
for the mobile device end-user. AppLock is password protected by the Administrator. End-user
mode locks the end-user into the configured application or applications. The end user can still
reboot the mobile device and respond to dialog boxes. The administrator-specified application is
automatically launched and runs in full screen mode when the device boots up.
See Also: Chapter 6 “AppLock” for instruction.
Wavelink Avalanche Enabler (Optional)
The following features are supported by the Wavelink Avalanche Enabler when used in
conjunction with the Avalanche Molility Center (MC) Console.
After configuration, Enabler files are installed upon initial bootup and after a hard reset. Network
parameter configuration is supported for:
• IP address: DHCP or static IP
• RF network SSID
• DNS hosts (primary, secondary, tertiary)
• Subnet mask
• Enabler update
Related Manual: “Using Wavelink Avalanche on LXE Windows Computers”.
The VX6 has the Avalanche Enabler installation files loaded, but not installed, on the mobile
device when it is shipped from LXE. The installation files are located in the System folder on CE
devices. The installation application must be run manually the first time Avalanche is used.
