182 Summit Radio
VX6 Reference Guide E-EQ-VX6RG-J
Summit Tray Icon
The Summit tray icon provides access to the SCU and a visual indicator of radio status.
The Summit tray icon is displayed when:
• The Summit radio is installed and active
• The Windows Zero Config utility is not active
• The Tray Icon setting is On
Click the icon to launch the SCU.
Use the tray icon to view the radio status:
The radio is not currently associated or authenticated to an Access
Point
The signal strength for the currently associated/authenticated Access
Point is -80 dBm or weaker
The signal strength for the currently associated/authenticated Access
Point is stronger than -80dBm but not stronger than -60 dBm
The signal strength for the currently associated/authenticated Access
Point is stronger than -60 dBm but not stronger than -40 dBm
The signal strength for the currently associated/authenticated Access
Point is stronger than -40 dBm
Wireless Zero Config Utility and the Summit Radio
• The WZC utility has an icon in the toolbar that looks like networked computers with
a red X through them, indicating that Wireless Zero Config application is enabled
but the connection is inactive at this time (the VX6 is not connected to a network).
• You can use either the Wireless Zero Configuration Utility or the Summit Client
Utility to connect to your network. LXE recommends using the Summit Client
Utility to connect to your network. The Wireless Zero Configuration Utility cannot
control the complete set of security features of the radio.
Select ThirdPartyConfig in the Active Profile drop down list as the active profile. Warmboot
the VX6. The Summit Client Utility passes control to Wireless Zero Config and the WZC
Wireless Information control panel. Using the options in the Wireless Zero Config panels, setup
radio and security settings.
To switch back to the SCU, select any other profile in the SCU Active Config drop down list,
except ThirdPartyConfig. Warmboot the VX6. Radio control is passed to the SCU.
