Control Panel Options 111
E-EQ-VX6RG-J VX6 Reference Guide
Mouse
Access: Start | Settings | Control Panel | Mouse
Set the double-click sensitivity for stylus taps on the touchscreen.
MX3X-VXC Options
Access: Start | Settings | Control Panel | MX3X-VXC Options
Set options such as IP V6, time sync, touchscreen enable and CapsLock.
It may be necessary to warmboot the VX6 after making desired changes. A pop up window
indicates if a warmboot is required.
Communication
Options on this tab configure communication options for the VX6.
Figure 3-23 MX3X-VXC Options Properties / Communication Tab
Enable TCP/IP Version 6
By default, IPv6 is disabled on the LXE device. Check this checkbox to enable IPv6.
Allow Remote Desktop Autologon
By default, Remote Desktop Autologon is disabled. Check this checkbox to enable Remote
Desktop Autologon.
Note: The .RDP file must be saved in the \System folder. When prompted, use the Save As
button to save the .RDP file is the \System directory. If the .RDP file is saved in the
default root folder location, the .RDP file will not persist across a warmboot.
