232 Cisco Radio
VX6 Reference Guide E-EQ-VX6RG-J
PEAP/ GTC Authentication Configuration
The Microsoft supplicant authenticates a user with the PEAP/GTC protocol.
Configuring the PEAP / GTC Supplicant
With the radio parameters configured set the EAP type to Cisco PEAP as shown below.
Figure 5-50 PEAP/GTC Wireless Network Properties
If the EAP type box text is not exactly as shown see “Installing Radio Drivers”, earlier in this
chapter, to change the radio cab file.
Click the Properties button.
Figure 5-51 PEAP Properties
When first configuring and authenticating, do not validate the server certificate. This allows the
user authentication to be tested. When user authentication is successful, return to this screen and
validate the server certificate as shown later in this section.
Check the Always try to resume secure session box.
