140 Wavelink Avalanche Enabler Configuration
VX6 Reference Guide E-EQ-VX6RG-J
Mobile Device Wireless and Network Settings
Once the connection to the Mobile Device Server is established, the Enabler will attempt to apply
all network and wireless settings contained in the active profile. The success of the application of
settings is dependent upon the local configuration of control parameters for the Enabler. These
local parameters cannot be overridden from the Avalanche Mobility Center Console.
The default Enabler adapter control setting are:
• Manage network settings – enabled
• Use Avalanche network profile – enabled
• Manage wireless settings – disabled for Windows CE Units
To configure the Avalanche Enabler management of the network and wireless settings:
1. Open the Enabler Settings Panels by tapping the Avalanche icon on the desktop.
2. Select File | Settings. Enter the password.
3. Select the Adapters tab.
4. Choose settings for the “Use Manual Settings” parameter.
5. Choose settings for “Manage Network Settings”, “Manage Wireless Settings” and “Use
Avalanche Network Profile”.
6. Click the OK button to save the changes.
7. Reboot the device.
The designation of the mobile device to the Avalanche CE Manager is LXE_VXC.
See Also: “Using Wavelink Avalanche on LXE Windows Computers”.
