190 Summit Radio
VX6 Reference Guide E-EQ-VX6RG-J
Auth Type
802.11 authentication type used when associating with AP
Options: Open
Shared key
LEAP
Default: Open
Note: Set the Auth Type radio parameter is set to “Open” for all configurations unless using
LEAP (not WPA) and the AP is configured for network EAP only. In this case, set the
Auth Type radio parameter to “LEAP”.
EAP Type
Extensible Authentication Protocol (EAP) type used for 802.1x authentication to AP
Options: None
LEAP
EAP-FAST
PEAP-MSCHAP
PEAP-GTC
EAP-TLS
Default: None
Note: The EAP type chosen determines if the Credentials button is active. Available entries on
the Credentials pop up window vary by EAP type chosen.
Security
Type of encryption used to protect transmitted data. This parameter was labeled as Encryption in
some versions of the SCU.
Options: None
Manual WEP
Auto WEP
WPA PSK
WPA TKIP
WPA2 PSK
WPA2 AES
CCKM TKIP
CKIP Manual
CKIP Auto
Default: None
Note: The Encryption type chosen determines if the WEP/PSK Keys button is active.
Available entries on the pop up window vary by encryption type chosen.
IMPORTANT – The settings for Auth Type, EAP Type and Encryption depend on the security
type chosen. Please refer to “Summit Wireless Security”, later in this chapter, to
determine the proper settings for the security type implemented on the wireless LAN.
