Control Panel Options 319
E-EQ-VX6RG-J VX6 Reference Guide
Password
Access: Start | Settings | Control Panel | Password Icon
Set VX6 access/power up password properties.
Factory Default Settings
Password Blank
At Power On Disabled
Note: Once a password is assigned, the Owner and Password Control Panel options require
the password to be entered before the Control Panel option can be accessed. If you
forget the password, it cannot be restored without performing a cold boot on the unit
(which erases all memory).
Enter the password, then type it again to confirm it and click the OK box to save the changes. The
password is immediately in effect.
Tap the Power On checkbox to set whether the user types a password at Power On.
Tap the Screen Saver checkbox to set whether the user types a password to clear the screensaver.
If there is no screensaver chosen, this checkbox is ignored.
Note: Screensaver option only works with Remote Desktop screensavers.
Figure C-15 Password Properties
