Cisco Radio 231
E-EQ-VX6RG-J VX6 Reference Guide
Server Authentication
To validate the server certificate install the root CA certificate. For instructions for installing, see
“Root Certificates”, later in this chapter.
Figure 5-48 Authentication Settings, Validate Server
Navigate to the Wireless Network Properties configuration screen.
Click the Properties button.
Check the Validate server
Click OK to dismiss the configuration boxes.
Figure 5-49 Advanced Wireless Settings, Authenticated SSID
Once the authentication completes, the status changes to show the VX6 has authenticated to the
<SSID>, as shown in the figure above.
Click on the IP Information tab and make sure there is a valid IP address as shown in the figure
labeled “IP Information Tab”, earlier in this chapter.
