A SERVICE OF

logo

Cisco Radio 237
E-EQ-VX6RG-J VX6 Reference Guide
WPA/LEAP
LEAP is a Cisco proprietary authentication protocol and is not supported by the Microsoft
supplicant. To configure the VX6 for WPA/LEAP, use the Cisco ACU installed during normal
installation of the Cisco radio driver.
Cisco ACU
Start the Cisco ACU by clicking the icon on the desktop or navigate to Start | Programs | Cisco |
ACU.
Click on the Profile tab.
Figure 5-60 ACU Profile Tab
Click the Rename button.
Name the profile
Figure 5-61 Renaming Profile
Click the Edit button.