Revision History 347
E-EQ-VX6RG-J VX6 Reference Guide
Revision History
Revision A, Initial Release: November 2004
Revision B: August 2005
Section Explanation
Chapter 1 – Introduction Revised “Document Conventions”, “When To Use This Guide”,
“Touchscreen and Mouse” and “Accessories” sections.
Specified the proper USB adapter cable to use in “Connect” section.
Chapter 2 – Physical
Description and Layout
Added “Identifying Your VX6”, “USB Keyboard/Mouse” and
“Touchscreen Heater” sections.
Updated “The Keyboards”, “CAPS LED”, “On/Off Switch”, “General
Windows CE .NET Keyboard Shortcuts” and “Ethernet/USB Dongle
Cable” sections.
Replaced “CapsLock, Scroll Lock and the VX6” section with “CapsLock
and the VX6” and “Scroll Lock and the VX6” sections.
Replaced “Antenna Connector” section with “Antenna Connections”
section.
Chapter 4 – System
Configuration
Revised “About”, “administrator Control”, “LAUNCH.EXE”, “Reflash the
VX6”, “Cisco Aironet Configuration Utility (ACU)”, “Symbol”,
“Accessibility” and “Date/Time” sections.
Added “2.4GHz Radio Configuration”, “Disabling the Touchscreen
Heater”, “Configuring CapsLock Behavior” and “Configuring IPv6
Broadcast Messages” sections.
Removed “Cisco – Aironet Configuration Utility (ACU)” and “Symbol”
sections. This information is now included in Chapter 5.
Chapter 5 – Wireless Network
Configuration
Added new chapter containing sections removed from Chapter 4.
Appendix A – Key Maps Revised “Keymap Source Format” and “COLxROWx Format” sections.
Revision C: October 2005
Section Explanation
Chapter 1 – Introduction Updated “When To Use This Guide”.
Updated “Accessories” list.
Chapter 4 – System
Configuration
Renamed “Configuring IPv6 Broadcast Messages” section to “Configuring
IPv6” and revised section.
Chapter 5 – Wireless Network
Configuration
Revised “Introduction” and “Cisco – Aironet Client Utility (ACU)” section.
Renamed “Configuring VX6 Radio” to “Configuring VX6 Radio Without
WPA”.
Added “WPA for the VX6” section.
