A SERVICE OF

logo

PCMCIA, CF and SD Slots 65
E-EQ-VX6RG-J VX6 Reference Guide
Summit CF Radio Card
The Summit 802.11b/g radio has two antenna ports.
The Summit CF radio is installed on a PCMCIA adapter. Hold the radio card with the
antenna ports facing down. Connect the antenna cable(s) as follows:
Summit radio with single antenna – Connect antenna cable to Main port.
Auxiliary port is not used.
Summit radio with dual antennas – Connect antenna cables to both Main and
Auxiliary ports.
Auxiliary
P
o
r
t
Main
P
o
r
t
Figure 2-35 Summit 802.11b/g Antenna Cable Connections
Cisco Radio Card
Hold the radio card with the Cisco logo label facing up. Connect the antenna cable(s) as
follows:
Single antenna – Connect antenna cable to right port, as shown below.
Dual antennas – Connect antenna cables to both ports.
C
ISCO
S
Y
STEMS
CISCOAIRONET 350
WIRELESS LAN ADAPTER
SERIES
Ri
g
ht Por
t
Left Port
Figure 2-36 Cisco Antenna Cable Connections