66 PCMCIA, CF and SD Slots
VX6 Reference Guide E-EQ-VX6RG-J
Symbol 11Mb Radio Card
Hold the radio card with the Symbol logo label facing up. Connect the antenna cable(s) as
follows:
•
Single antenna – Connect antenna cable to Port A (left port), as shown below.
•
Dual antennas – Connect antenna cables to both ports.
Spectrum24®
Port
Port A
IEEE 802.11b
High Rate 11 Mbps
Wireless LAN Adapter
Figure 2-37 Symbol 11Mb Antenna Cable Connections
4. Now complete the insertion of the Type II PCMCIA Radio into the slot.
Note: When this process is complete, reattach the access cover screws using a torque
wrench capable of measuring to 9±1 inch pounds (1.016±.11 N/m). The screws
must be fastened to 9 inch pounds each. The screws require a Phillips size 1
driver head.
5. Re-connect the power cord/cable and turn the VX6 on.
6. For VX6’s with a Summit radio, review RX Diversity and TX Diversity on the Global
Settings tab of the Summit Client Utility to ensure these settings correspond to the VX6’s
antenna configuration.
