Filter
Top Products
Change Engine Oil and Filter
Change oil and filter initially after the first 50 hours of op-
eration, thereafter change oil and filter every 100 hours.
1. Remove drain plug (Fig. 7) and let oil flow into drain
pan. When oil stops, install drain plug.
2. Remove oil filter (Fig. 8). Apply a light coat of clean
oil to the new filter seal before screwing it on. DO NOT
OVER–TIGHTEN.
3. Add oil to crankcase. Capacity is 3.5 U.S. quarts
(3.3 liters) with filter. Refer to Check Engine Oil.
1
Figure 7
1. Drain Plug
1
Figure 8
1. Oil Filter
Ford VSG–411 Engine
Page 3 – 6
Groundsmaster 3000