Filter
Top Products
SECTION 2 - OPERATION
2-116
DRAWBAR LOADING
The maximum recommended weight that can be
carried on the drawbar is as follows:
Drawbar Position 508 mm (20″)
Max. Vertical Load 2700 kg (6000 lbs.)
IMPORTANT: Loads on the drawbar increase
greatly when traveling in rough conditions.
Reduce speed to reduce the possibility of
damage to the tractor or implement.
The vertical load on the drawbar must be
considered as ballast and added to the weight of
the tractor. Do not exceed the maximum
operating weight of the tractor.
NOTE: An optional drawbar support is
available for applications that may require
extra support.
IMPLEMENT SAFETY CHAINS
Implements that have safety chains can be
attached to thetractor usingthe tie-down slots, 1,
and thechain slot, 2,on the drawbar anddrawbar
cage. Make sure the chain has enough slack in it
to allow the tractor to turn and not restrict
implement turning.
The safety chain should be strong enough to
carry the gross weight of the implement to be
towed by the tractor. Check the implement
operator’s manual for weight and safety chain
attachment instructions.
Your Buhler Versatile dealer can assist in
properly attaching safety chains to the tractor.
Figure 2-154
1
2
Figure 2-155
2
1