Filter
Top Products
3-47
Function Reference
New GPIB Address (Remote Setup Panel)
New GPIB Address (Remote Setup Panel)
Allows you to enter a new GPIB address. To change the address, use the
numeric entry keys, step keys, or knob. Press the Defaults softkey to reset the
address to the factory preset default, 23.
Key Path System > More System Functions > GPIB & Network Setup > GPIB Address
Related Functions Current GPIB Address
Next Peak Down ↓
Places the active marker on the next highest peak down from the current
marker amplitude. This peak must meet the peak excursion and threshold cri-
teria. If the specified marker is off, it will be turned on and placed at the cen-
ter wavelength. The search for the next maximum will reference that point.
Key Path Markers > More Marker Functions > Marker Search Menu > Next Peak
↓
Remote
Commands
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum:NEXT
Next Peak Left ←
Places the marker on the next peak located at a lower X-axis value (usually
wavelength) than the current marker position. This peak must meet the peak
excursion and threshold criteria. If the specified marker is off, it will be turned
on and placed at the center wavelength or frequency.
Key Path Markers > More Marker Functions > Marker Search Menu >Next Peak
←
Remote
Commands
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum:LEFT