Filter
Top Products
Workman e2050/e2065
Page 3 – 21
Electrical System (Rev. B)
6. Replace contactor if necessary.
7. Reconnect electrical connections to contactor. If
main contactor connections were removed, use Figure
34 as a guide for reattaching cable and wire harness
connections.
8. Reconnect battery cable that was removed from bat-
tery pack.
1. Main contactor
2. Cable to controller B+
3. Lock nut
4. Flat washer
5. Wire harness connector
6. Fuse (F1)
7. Positive battery cable
8. Isolator
Figure 34
1
2
3
4
5
6
3
7
8
4
Electrical
System