Filter
Top Products
Reelmaster 4000–D Page 3 – 13 Kubota Diesel Engine
Engine
Engine Removal
1. Park machine on a level surface, lower cutting units,
stop engine, engage parking brake, and remove key
from the ignition switch.
2. Pivot seat up. Lift front canopy and remove from the
brackets (Fig. 19).
3. Disconnect and remove battery from the machine
(see Battery Service in Chapter 5 – Electrical Systems).
CAUTION
If engine is hot, pressurized coolant can escape
and cause burns when the radiator hoses are re-
moved. The radiator and exhaust exhaust tube
may be hot. Avoid possible burns; allow engine,
radiator, and exhaust system to cool before re-
moving radiator hoses or exhaust tube.
4. Drain radiator. Disconnect both hoses from the ra-
diator (Fig. 20).
5. Remove air hose from air intake manifold (Fig. 20).
6. Remove exhaust shield from the engine (Fig. 20).
7. Remove fan guard and fan shroud from the radiator
(Fig. 20).
8. Remove fan from the fan pulley. Remove fan shroud
and fan from machine (Fig. 21). Remove fan shroud
from the machine.
Figure 19
1. Canopy 2. Brackets
2
1
Figure 20
1. Battery
2. Upper radiator hose
3. Lower radiator hose
4. Fan guard
5. Fan shroud
6. Exhaust shield
7. Starter
8. OIl pressure switch
9. Alternator
10. Air hose
11. Hi temp. warning switch
12. Hi temp. cutout switch
2
3
4
1
8
6
9
7
5
10
11
12
Figure 21
1. Fan
2. Fan pulley
3. Cap screws
2
1
3
Kubota Diesel
Engine