Filter
Top Products
Reelmaster 4000–D Page 7 – 3 Cutting Units
Special Tools
Order special tools from the
TORO SPECIAL TOOLS
AND APPLICATIONS GUIDE (COMMERCIAL PROD-
UCTS)
.
Some tools may be listed in the Reelmaster 4000–D
Parts Catalog. Some tools may also be available from
a local supplier.
Gauge Bar Assembly
Use gauge bar to set final height–of–cut (floating cutting
units with front rollers only).
Figure 2
Handle Assembly
For applying lapping compound to cutting units while
keeping hands a safe distance from the rotating reel.
Figure 3
Bedknife Screw Tool
Fits Toro bedknife attaching screws. Use with torque
wrench to secure bedknife to bedbar. With clean bedbar
threads and new screws, tighten to a torque of 250 to
300 in–lb (288 to 346 kg–cm).
Note: Remove all rust, scale and corrosion from bed-
bar surface before installing bedknife.
IMPORTANT:Do not use an air impact wrench with
this tool.
Figure 4
Cutting Units