Filter
Top Products
Reelmaster 4000–D
Page 2 – 10
Product Records and Maintenance
Reelmaster 4000–D Maintenance Schedule
Minimum Recommended Maintenance Intervals
Maintenance Procedure
Lubricate Reel Control Valve Grease Fitting
Lubricate Reel Speed Valve with Oil
Lubricate All Grease Fittings
Check Battery Condition and Connections
} Change Engine Oil and Filter
Drain Water from Hydraulic Tank
{ Check Engine Fan and Alternator Belt
Inspect Cooling System Hoses
Inspect Cutting Unit Reel Drive Belts
{ Torque Wheel Lug Nuts
Service Air Cleaner
Replace Fuel Filters
Inspect Fuel Lines and Connections
} Check Engine RPM (idle and full throttle)
Drain and Clean Fuel Tank
} Replace Hydraulic Oil Filters
} Adjust Valves
Replace Hydraulic Tank Breather
} Change Front Planetary Gear Lube
Pack Rear Wheel Bearings
Check Rear Wheel Toe–in
{ Initial break in at 10 hours
} Initial break in at 50 hours
Replace Moving Hydraulic Hoses
Replace Safety Switches
Coolant System – Flush/Replace Fluid
Change Hydraulic Oil
Every
50hrs
Every
100hrs
Every
200hrs
Every
400hrs
Every
800hrs
(See Operator’s and Service Manual for specifications and procedures)
Maintenance Interval & Service
Annual Recommendations:
Items listed are recommended every 1500
hours or 2 years, whichever occurs first.
A Level
Service
C Level
Service
D Level
Service
E Level
Service
B Level
Service