Filter
Top Products
Workman MD/MDXPage 7 -- 6Chassis
Adjustments
Adjust Parking Brake
1. Pry the rubber cover off of the parking brake.
2. Loosen the set screw securing the knob to the park-
ing brake lever (Fig. 1).
3. Rotate the knob until a force from 30 to 40 lb. (133 to
177 N) is required to actuate the lever.
4. Tighten the set screw and install the rubber cover.
1. Parking brake lever
2. Brake knob
3. Set screw
Figure 1
3
2
1