Filter
Top Products
8-8 Chapter 8: Error Messages
Model 801GC, 801GF & 801GX¥Rev. A
2080 Pixel rate too low
The pixel rate is below the minimum rate supported by the
generator.
■ Increase the value of HTOT.
■ Increase the value of HRAT.
2090 Horizontal total not even
The generator does not support an odd number of total
pixels per scan line.
■ Make the horizontal period (in pixels) an even number.
2091 Horizontal total must be multiple of 4 at pixel
rate
The generator does not support horizontal pixel totals (active
+ blanking) that cannot be evenly divided by four (4) at the
given pixel rate.
■ Make the total horizontal pixels per line to be evenly
divisible by 4.
■ Decrease the pixel rate.
2130 Horizontal active too small
The number of active pixels per horizontal scan line is below
the minimum supported by the generator.
■ Increase the horizontal active pixels.
2140 Horizontal blanking too small
The number of blanked pixels per horizontal scan line is
below the minimum supported by the generator.
■ Increase the horizontal period (in pixels).
■ Decrease horizontal active (in pixels).
2141 Horizontal blanking too small
The number of blanked pixels per horizontal scan line (HTOT
- HRES) is below the minimum supported by the generator.
■ Increase the horizontal period (in pixels).
■ Decrease horizontal active (in pixels).
2150 Horizontal blanking too small
The number of blanked pixels per horizontal scan line (HTOT
- HRES) is below the minimum supported by the generator.
■ Increase the horizontal period (in pixels).
■ Decrease horizontal active (in pixels).