Filter
Top Products
6-60 Chapter 6: Programming
Model 801GC, 801GF & 801GX¥Rev. A
Downloading formats using a DOS-
compatible computer
There are two ways of downloading a format file to
the 801G*. You can use the send.bat utility or the
file download function on the terminal emulation
program that is discussed in the next section.
The following procedure should be used when us-
ing the send.bat utility program that is on the disk
disk supplied with the 801G*.
1. Connect the 801G* to a personal computer
using the instructions given in the “Making Con-
nections” chapter of this manual.
3. Send new command files to the 801GP using
the send.bat utility found on the utility disk. To
download a file, the command is:
SEND filename
❖ The send.bat utility assumes that you are con-
necting the 801G* to COM1. If this is not the
case, then you must modify the COM1 references
in the file to match the COM port you are using.