6-72 Chapter 6: Programming
Model 801GC, 801GF & 801GX¥Rev. A
*OPT? Options
Query Syntax: The *OPT query returns a list of options installed in
the 801G*.
Query Syntax: *OPT?
Returns: <option string><NL>
Example: *OPT?
*RST Reset
Definition: The *RST command performs a device reset. This
places the 801G* into a known condition. These
conditions are:
• IEEE-488 address set to 15
• Status Byte cleared
• Input queue empty
• Output queue empty
Command Syntax: *RST
Example: *RST
Related Commands: *CLS