Filter
Top Products
2-7
Switches
The 801G* has two switches located on its left side.
Both switches are related to AC power.
AC Select
This recessed slide switch sets the safe AC line voltage
operating range of the generator. The “Making Con-
nections” chapter of this manual describes the cor-
rect procedure for setting this switch
❖ Do not change the voltage selector switch set-
ting while the 801G* is connected to the AC power
line. Make sure that the switch is in the correct
position before plugging in the 801G*.
Power Switch
This rocker switch turns the power on and off. Press-
ing the side of the switch with the color dot or the
number “1” turns the power on.
❖ CAUTION:Holding down any of the buttons on
the front panel while turning on power may
produce unexpected and extremely undesirable
results. Please see the “Programming” chapter
for information on using special power-up but-
ton combinations.
Switches