Filter
Top Products
2-8 Chapter 2: Basic Operation
Model 801GC, 801GF & 801GX¥Rev. A
This section of the manual describes the functions
of the buttons when the 801G* is in the normal mode
of operation The buttons are used for other func-
tions when the 801G* is operated in and a test se-
quence or programming mode. Please see the
“Programming” chapter for detailed information on
operating the 801G* in the other modes.
❖ CAUTION:Holding down any of the buttons on
the front panel while turning on power may
produce unexpected and extremely undesirable
results. Please see the “Programming” chapter
for information on using special power-up but-
ton combinations.
Image Button
The Image push-button determines the behavior of
the “Image” knob in the normal operating mode.
Please see an earlier section on the “Image” knob
for information on how the button interacts with
the knob.
❖ If there is only one test image associated with a
name in the image list, the “Image” button can
not be turned on for that image.
Buttons
The 801G* has a total of eight push-button switches,
arranged into four function groups: Image, Video
Gate, Sync Gate, and Outputs. All of the buttons
have built-in indicators. When illuminated, a button’s
function is considered on (or enabled).