Filter
Top Products
6-151
MSIZ light Meter SIZe
Classification: System parameter setting
Command Syntax: MSIZ <width>, <height>
or
MSIZ <common size> (for a square box)
Limits: <size> = positive floating point number
Query Syntax: MSIZ?
Query Response: <width>, <height>
Description: The MSIZ command establishes the physical size of the lightmeter
box(es) displayed in the BriteBox test image. The unit of measure
used is based on the current setting of the system level USIZ
parameter. It also affects the size of the cursor boxes in the
Persist image. Changing the size will not change the currently
displayed image. The MSIZ? query returns the current settings
of MSIZ based on the current setting of the system level USIZ
parameter.
Other Required Cmds: The correct unit of measure should be selected with the USIZ
command prior to setting the size.
Example: USIZ 1 // Select inches for units
MSIZ 2.0 // Set size to 2.0 inches IMGL
// BriteBox Select BriteBox test
// image IMGU Draw selected image
// using new size
NAMF NAMe Find
Classification: Directory editor control
Command Syntax: None
Query Syntax: NAMF? <name>
Limits: <name> = a valid MS-DOS filename
(8 characters minus any extension)
Query Response: <index>
Description: The query will return the index number of the entry with name
<name> in the directory edit buffer. The first name in the buffer
has an index value of 1. If <name> is not found, a value of zero
(0) is returned.
Other Required Cmds: None
Example: NAMF? VGA_m4 // Return position of
// VGA_m4 in directory