Filter
Top Products
2-4 Chapter 2: Basic Operation
Model 801GC, 801GF & 801GX¥Rev. A
Displays and Indicators (Normal Mode)
The figure below shows a typical LCD display in
the normal operating mode. Please see the “Trouble-
shooting” chapter of this manual if the LCD is show-
ing different types of information.
This light is on whenever the 801G*; is plugged into
a live AC outlet and the power switch is ON.
The horizontal scanning frequency rounded to the
nearest kHz.
The format’s position on the Format knob list.
❖ A "=" sign appearing between the memory loca-
tion and name indicate the current state and saved
state exactly match. Pressing some keys may
modify the current state so that it no longer
matches the saved version.
The name of the current signal format.
A ( ’ ) mark at end indicates a justified format.
The name of the current test image.
The image’s position on the Image knob list.
❖ An "m" appearing to the left of the image loca-
tion indicates monochrome analog video.
The vertical scanning frequency (field rate) rounded
to the nearest hertz.