Filter
Top Products
48 Chapter 2
Basic Operation
Configuring the RF Output
Figure 2-9 Setup for E8247C PSG and E8257C PSG without Option 1EA
Setting the Signal Generator
1. Turn on the signal generator’s line power.
Upon power-up, the signal generator automatically:
• senses the mm-wave source module,
• switches the signal generator’s leveling mode to external/source module (power is leveled at the
mm-wave source module output),
• sets the mm-wave source module frequency and amplitude to the source module’s preset values, and
•in the FREQUENCY and AMPLITUDE areas of the signal generator, displays the RF output frequency
and amplitude values available at the mm-wave source module output.