Filter
Top Products
Chapter 10 197
Troubleshooting
Cannot Turn Off Help Mode
Cannot Turn Off Help Mode
1. Press Utility > Instrument Info/Help Mode
2. Press
Help Mode Single Cont until Single is highlighted.
The signal generator has two help modes; single and continuous.
When you press
Help in single mode (the factory preset condition), help text is provided for the next key you
press. Pressing another key will exit the help mode and activate the key’s function.
When you press
Help in continuous mode, help text is provided for the next key you press and that key’s
function is also activated (except for
Preset). You will stay in help mode until you press Help again or change
to single mode.