Filter
Top Products
124 Chapter 6
Custom Arb Waveform Generator
Working with User-Defined Setups (Modes)-Custom Arb Only
Recalling a User-Defined Custom Digital Modulation State
In this procedure, you learn how to select (recall) a previously stored custom digital modulation state from
the Memory Catalog (the Catalog of DMOD Files).
1. Press
Preset.
2. Press
Mode > Custom > ARB Waveform Generator > Setup Select.
3. Press
More (1 of 2) > Custom Digital Mod State.
4. Press
Select File to select a custom modulation state from the Catalog of DMOD Files.
The user-defined custom digital modulation state should now be recalled from non-volatile memory.
Because the RF output amplitude, frequency, and operating state settings are not stored as part of a
user-defined digital modulation state file, they must still be set or recalled separately. For more
information, refer to “Using Data Storage Functions” on page 52.